H4C-3

دسته‌بندی:
PRODUCT FEATURES
USER MANUAL  APPLICATION MANUAL 
 Controllable axis: X, Y, Z , A 4 axis.
 Voltage-driven servo system with maximum speed of response 1000
KPPS (i.e. 60 meters/min with 1μ resolution).
 Design the LCD screen freely and simply. Use the PC screen to
display editing program and test program. Transfer data from PC
through RS232 and execute the program.
 Besides basic program design , it can be done by CAD/CAM and
transferred through RS232C.
 Keyboard can be customized to suit user’s application or used as
thumb switch.
 H4X controller can achieve accurate feed-length by comparing the
feedback from the passive encoder and the roller.
 512 KB program memory.
 Battery backup in case of power-off.(Battery Backup)
 MCM (machine constants) parameter table let user customize his
specific machining requirements.
 Backlash error compensation for worn ball-screw.
 Providing 6 sets of user defined work coordinate to simplify
program design.
 Providing data storage for 8 sets of tool offset compensation.
 User can customize Macro function (MACRO)
 Feed-rate control either by mm/minute or mm/revolution
 Continuous program execution or single block at a time
 Option skip, option stop, and feed-hold function (Option Skip)
 Interchangeable absolute or incremental coordinate in programming
 Self-diagnostic and error function
 Circular programming by radius “R” as well as I and J values
 Each axis can be set as Master/Slave mode ( Reference by 3-3 3-4)
 MPG hand-wheel interface for program testing (MPG test)
 Provide standard I/O=24/16 programmable logic control
 Provide series I/O=32/32 programmable logic control 

ارسال پاسخ

نشانی ایمیل شما منتشر نخواهد شد.

  • 2 + 3 =